1. check with cfgadm -al
Find the label AP-ID that the disk will be replace
2. Unconfigure the hard disk that will be replace
#cfgadm -c unconfigure c1::dsk/c1t1d0
3. verify that the disk is now unconfigured
#cfgadm -al
4. Replace the disk
5. Connect the new drive
#cfgadm -c configure c1::dsk/c1t1d0
6. format the disk and label the disk
#format > type > label
7. Run metastat then check the disk that needed maintenance
8. Run metareplace -e d8 c1t1d0s0 (that the disk need maintenance)
done
No comments:
Post a Comment