recently i am using Telkomfalsh to access internet at my home with modem Huawei E169. The below i will show you how to configure the conection
1. go to conection manager and click mobile broadband as below picture
2. click add and see the below picture
3. click Forward and see the below picture
Choose the contry "indonesia"
4. click Forward and see the below picture
Choose "telkomsel"
5. click Forward and see the below picture
6. click Forward and see the below picture
7. click Apply and see the below picture
Click "connect automaticly" and delet username adn Password
8. Click Apply and close the network manager
9. Safe remove drive on virtual drive by right click Telkomflash drive.
10 open terminal and run the below script
>sudo rmmod usb-storage
>sudo modprobe -r option
>sudo modprobe -r usbserial
>sudo modprobe usbserial vendor=0x12d1 product=0x1001
and your Tflash is conected
my suggestion save the above script to file and make excuteable so next time you just run this file without running script one by one
hopefully can help you all.
5 comments:
mantaf! nice info boz. i will try later when using the provider.
still using speed* :)
aku pake ny e 160g dan m2, produk uda ku ganti ke vendor=0x12d1 product=0x1003, gambar network ny hanya muter2 gitu, bingun mau di apain lg? not working kang?
mungkin link ini bisa membantu mas http://tensixtyone.com/perma/howto-debian-lenny-huawei-e160g
Artikel menarik dan Cara install modem huaweiE1550 bisa baca di sini Belajar Ilmu Komputer
wahhh....top abis mas...makasih yaaa..btw tapi jgn lupa yah bagi yang pengen coba resepnya untuk mematikan dulu PIN verification-nya....okee
numpang iklan yahh...www.karavanmusi.com..gw jual produk khas kota palembang hehehehehe
Post a Comment